Description

UPVC Sheet Price in Pakistan – Complete Roofing & Shed Guide 2026

Name: uPVC Sheet for Roof Buildings Shed Price in Pakistan
SKU: 29993
Availability: InStock

UPVC roofing sheets are increasingly being used in Pakistan for industrial sheds, warehouses, factories, agricultural buildings, workshops, parking shades, commercial structures and other applications where a lightweight and weather-resistant roof is required. However, the right sheet should not be selected on price alone. Thickness, profile, span, support spacing, fixing method, heat exposure, ventilation and the building's structural design all affect the final performance of a roof.

This guide explains the UPVC sheet price in Pakistan, available thicknesses, practical applications, installation considerations, advantages and limitations, and how UPVC compares with steel, PPGI, PPGL and other roofing materials.

September 2026 indicative rates:
UPVC sheet 12 mm: approximately PKR 360 per sq. ft.
UPVC sheet 3 mm: approximately PKR 250 per sq. ft.
UPVC sheet 2 mm: approximately PKR 200 per sq. ft.

Actual project pricing can vary according to profile, thickness, quantity, colour, sheet length, transport, fixing accessories and supplier quotation.

UPVC Sheet Price in Pakistan – September 2026

The price of UPVC sheets in Pakistan depends mainly on thickness, profile, dimensions, material quality, colour, order quantity and application. For budgeting purposes, the following rates can be used as an indicative September 2026 reference based on the rates supplied for this page.

UPVC Sheet	Indicative Rate	Typical Consideration
2 mm UPVC sheet	PKR 200/sq. ft.	Lightweight roofing applications where the design is suitable
3 mm UPVC sheet	PKR 250/sq. ft.	General roofing and shed applications
12 mm UPVC sheet	PKR 360/sq. ft.	Higher-thickness applications requiring a more substantial sheet

These figures are material-rate references, not a complete installed-roof price. A project quotation should also consider steel structure, purlins, screws, washers, flashing, ridge caps, side closures, sealants, labour, transportation and any insulation or ceiling system.

What Is a UPVC Roofing Sheet?

UPVC stands for Unplasticized Polyvinyl Chloride. UPVC roofing products are manufactured as rigid polymer sheets, commonly in profiled or corrugated forms for roof drainage and structural application over suitable supports.

Unlike conventional steel roofing, UPVC is not a metal sheet. It therefore behaves differently under temperature changes, impact, fixing pressure and long-term loading. The supporting structure and fixing system should be designed according to the manufacturer's technical recommendations rather than treating UPVC as a direct one-for-one replacement for every steel roof.

Why UPVC Sheets Are Used for Roofs and Sheds in Pakistan

Pakistan has demanding roofing conditions: strong summer sunlight, high roof temperatures, monsoon rain, dust, industrial environments and significant temperature variation between seasons. UPVC roofing is considered for applications where corrosion resistance, low maintenance and reduced thermal transfer compared with exposed metal roofing are important.

Industrial sheds and workshops
Warehouses and storage buildings
Agricultural and livestock structures
Factories and production buildings
Parking and vehicle shades
Commercial sheds
Temporary or semi-permanent covered areas
Extensions to existing buildings
Roofing where corrosion is a concern

UPVC Roofing Sheet vs Steel Roofing Sheet

Choosing between UPVC and steel should be based on the building's purpose rather than simply selecting the cheaper material.

Factor	UPVC Roofing	Steel / PPGI Roofing
Corrosion	Naturally resistant to rust	Requires suitable coating/protection
Weight	Generally lightweight	Generally heavier
Thermal behaviour	Different from exposed metal; product-specific performance	Metal can become very hot without insulation
Maintenance	Low maintenance when correctly installed	Coating and corrosion condition should be monitored
Structural strength	Depends strongly on profile, thickness and support spacing	Usually more suitable for demanding structural roofing applications

UPVC Sheet Thickness: 2 mm, 3 mm and 12 mm

Thickness is one of the most important factors when comparing UPVC sheets price in Pakistan. A lower price per square foot does not automatically mean a better value because the sheet's performance depends on its thickness, profile, support spacing and application.

2 mm UPVC Sheet

The indicative September 2026 rate supplied for 2 mm UPVC sheet is PKR 200 per sq. ft. This type of sheet can be considered for lightweight roofing applications where the roof design, support spacing and expected loads are appropriate.

3 mm UPVC Sheet

The indicative September 2026 rate supplied for 3 mm UPVC sheet is PKR 250 per sq. ft. A 3 mm sheet provides a different stiffness and handling characteristic from thinner material and can be considered for general shed and roofing applications subject to the manufacturer's specifications.

12 mm UPVC Sheet

The indicative September 2026 rate supplied for 12 mm UPVC sheet is PKR 360 per sq. ft. A thicker UPVC product should not simply be judged by thickness alone; profile geometry, reinforcement, span requirements and fixing details remain important.

12 Feet Roofing Sheet Price in Pakistan

The phrase 12 feet roofing sheet price in Pakistan is commonly searched by customers because 12-foot sheets are convenient for many roof layouts. However, a sheet's total price cannot be calculated accurately from length alone.

For example, if a roofing sheet is 12 feet long and its effective covered width is known, the material area can be calculated from:

Sheet area = length × effective cover width

For a complete project, customers should calculate the effective covered area rather than the nominal sheet width because profiled sheets overlap at the side and end joints.

The final 12-foot roofing sheet cost can also change according to profile, thickness, quantity, transportation and cutting requirements.

UPVC Roof Sheet Profile and Effective Cover Width

A roofing sheet is not normally priced or estimated only by its overall physical dimensions. Corrugations or profiles create side laps, and these reduce the effective coverage of each sheet.

For accurate estimation, the supplier or fabricator should confirm:

Overall sheet width
Effective cover width
Sheet length
Thickness
Profile height and geometry
Side-lap requirement
End-lap requirement
Recommended purlin spacing
Recommended screw type and spacing

UPVC Roofing Sheet Installation

Correct installation is just as important as the material itself. Even a good roofing sheet can develop leakage, cracking or premature failure if the support system and fixing arrangement are incorrect.

1. Check the Roof Structure

The steel frame, rafters, purlins and supporting members should be properly aligned and capable of carrying the expected roof loads. The sheet should not be expected to compensate for an incorrectly fabricated structure.

2. Confirm Purlin Spacing

Purlin spacing should follow the technical recommendation for the selected UPVC profile and thickness. Excessive spacing can increase sheet deflection and stress, especially under wind or maintenance loads.

3. Use Suitable Roofing Fasteners

Roofing screws should be selected for the substrate and roofing product. Appropriate washers and sealing systems help reduce the risk of water entering through fixing points.

4. Allow for Thermal Movement

Polymer roofing materials can expand and contract with temperature. Fixing details should therefore follow the product manufacturer's recommendations and should not unnecessarily restrict thermal movement.

5. Provide Proper Roof Slope

Roof slope should be sufficient for efficient rainwater drainage and should comply with the profile manufacturer's recommendations. Standing water increases the risk of leakage and long-term deterioration.

UPVC Roof Sheet Leakage: Common Causes

When a customer searches for a PVC sheet for roof or UPVC roof, leakage resistance is often a major concern. Most roofing leakage problems are associated with installation details rather than the basic concept of profiled roofing.

Insufficient roof slope
Incorrect side or end laps
Improper screw placement
Damaged washers
Over-tightened fasteners
Insufficient flashing
Poor ridge detailing
Incorrect valley or gutter arrangement
Inadequate sealing around penetrations

Heat Resistant Roofing Sheets and Summer Conditions in Pakistan

Roof temperature is a major concern in Pakistan, particularly in Lahore, Multan, Islamabad, Rawalpindi, Karachi and other cities exposed to intense summer conditions.

UPVC roofing can be considered where a non-metallic roofing surface is preferred, but customers should not assume that every UPVC product has identical thermal performance. Colour, thickness, profile, ventilation, ceiling construction and insulation all influence the temperature inside a building.

For a factory, warehouse or workshop where internal temperature is critical, the roofing decision should be combined with roof insulation, ventilation, ridge ventilation, air circulation and an appropriate ceiling system.

Can UPVC Roofing Be Used for Industrial Sheds?

Yes, UPVC roofing can be used on suitable industrial and commercial structures, but the roof must be designed around the limitations of the selected sheet. It is particularly important to check wind exposure, support spacing, maintenance access and expected environmental conditions.

For heavy-duty industrial buildings, cranes, high-load roofs or applications where frequent roof access is expected, a properly engineered steel roofing system may be more appropriate. UPVC should be selected where its material properties match the building's requirements.

UPVC Sheet for Factory and Warehouse Roofs

For factories and warehouses, the roof is more than a weather cover. It affects daylight, heat gain, ventilation, maintenance and operating conditions.

A complete industrial roofing system may include:

Primary steel frame
Secondary purlins
UPVC roof sheets
Ridge caps
Flashing
Gutters and downpipes
Roof fasteners
Sealing washers
Insulation where required
Ventilation openings
Skylight or translucent roofing sections where suitable

UPVC Roofing for Sheds and Parking Areas

For parking shades, workshops and smaller covered areas, customers often search for a plastic sheet for roof, plastic roof sheets or plastic shed roof. UPVC can be a practical option when low weight, corrosion resistance and simple maintenance are important.

The steel support frame should still be properly engineered. A lightweight roof does not mean that the supporting frame can be fabricated without structural calculations.

UPVC vs PVC: Are They the Same?

The terms UPVC sheet and PVC sheet are frequently used interchangeably in online searches, but technically they should not automatically be treated as identical products.

UPVC means unplasticized PVC, while PVC is a broader material category. Roofing products can have different formulations, profiles, reinforcement systems and performance characteristics. Therefore, customers should ask for the exact product specification rather than purchasing only on the basis of the word “PVC”.

UPVC Roofing Sheet vs Corrugated Sheet

Corrugated sheet price in Pakistan can refer to several different materials, including metal and polymer-based profiles. A corrugated steel sheet, PPGI sheet and UPVC corrugated roofing sheet are not equivalent products even when their surface profile looks similar.

When comparing prices, always compare the same basis: material type, thickness, effective cover area, coating or formulation, profile, accessories and installation.

UPVC vs PPGI and PPGL Roofing

PPGI and PPGL are coated steel roofing products commonly used in industrial and commercial construction. They offer a strong steel substrate with protective coating systems, while UPVC provides a polymer-based alternative.

For a high-performance industrial building, the choice should consider structural loading, corrosion environment, thermal requirements, expected life, maintenance, aesthetics and total installed cost rather than only the sheet price per square foot.

Is UPVC Better Than Iron Sheet for Roofing?

There is no single answer for every building. The term iron sheet price in Pakistan is commonly used in the market for steel roofing products, but customers should identify the actual material and gauge before comparing it with UPVC.

Steel is generally preferred where higher mechanical strength and demanding structural performance are required. UPVC can be attractive where corrosion resistance, lightweight construction and polymer roofing characteristics are priorities.

Advantages of UPVC Roofing Sheets

Corrosion resistance: UPVC does not rust like conventional unprotected steel.
Lightweight construction: Lower roof-sheet weight can simplify handling and installation.
Low maintenance: Properly installed UPVC roofing can require relatively little routine maintenance.
Suitable for many climates: It can be used in a wide range of building applications when the product is correctly specified.
Water-shedding profile: Corrugated/profied geometry supports rainwater drainage when installed with suitable slope and laps.
Good option for corrosion-prone environments: Particularly where metal roofing is exposed to aggressive moisture or chemical conditions.
Suitable for commercial and industrial applications: Subject to engineering and manufacturer recommendations.

Limitations of UPVC Roofing

A professional buying guide should also explain where UPVC may not be the best choice.

Mechanical strength depends strongly on thickness and profile.
Large unsupported spans should not be attempted without technical approval.
Roof access and maintenance loads require proper consideration.
Thermal expansion must be accommodated in the fixing system.
Product performance varies significantly between manufacturers and formulations.
Very high-temperature environments require careful product selection and ventilation design.
Heavy industrial applications may require steel roofing because of higher structural demands.

How to Calculate the Total UPVC Roof Cost

Customers frequently make the mistake of multiplying roof area by the sheet rate and assuming that this is the total project cost. A professional estimate should include the complete roofing system.

Total roofing budget = sheets + steel structure + purlins + fasteners + flashing + ridge + gutters + sealants + labour + transportation + insulation/ceiling, where required.

For example, a warehouse may have a 10,000 sq. ft. roof footprint but the actual sheet requirement can be higher because of roof slope, overlaps, cutting and wastage. The roof's sloping surface area should therefore be measured before ordering material.

What Increases the Final Roof Sheet Price?

Higher sheet thickness
Premium profile
Special colours
Large quantity or small quantity orders
Longer sheet lengths
Transportation distance
Roof height
Installation difficulty
Special flashing and ridge details
Insulation requirements
Gutters and rainwater systems

UPVC Sheet Price in Lahore, Karachi, Rawalpindi and Other Cities

Online searches for UPVC sheet price in Lahore, UPVC roof sheet price in Karachi, roof sheet price in Rawalpindi and other locations often show different quotations. This does not necessarily mean that the material itself has a different base price in every city.

Freight, distributor margin, quantity, availability, profile and project delivery requirements can all affect the final quotation. For a large industrial order, delivered project pricing should be compared rather than only the advertised per-square-foot rate.

UPVC Roof Sheet Buying Checklist

Before placing an order, ask the supplier for the following information:

Exact material specification
Sheet thickness
Sheet profile
Overall width and effective cover width
Available lengths
Recommended purlin spacing
Recommended roof slope
Fastener specification
Warranty and product documentation
Colour options
Expected application and limitations
Delivery and installation terms

UPVC Roofing Sheet for New Shed Construction

If you are constructing a new factory, warehouse, workshop or commercial shed, roofing should be considered during the structural design stage rather than after the steel frame has already been fabricated.

The roof material influences purlin spacing, fixing details, drainage, ridge design, gutters, ventilation and overall roof detailing. Selecting the sheet before finalizing the secondary steel system can help avoid unnecessary modifications during installation.

Why Buy Roofing Material from an Experienced Manufacturer?

Roofing is a complete construction system, not simply a sheet product. An experienced supplier should be able to discuss the application, dimensions, thickness, structure, fixing method and project requirements before finalizing the quotation.

Silver Steel Mills provides construction and industrial solutions for customers requiring roofing, steel structures, industrial sheds and related building materials. For project-based requirements, the correct specification should be finalized according to the building dimensions and intended use.

Frequently Asked Questions About UPVC Sheets

What is the UPVC sheet price in Pakistan?

Based on the September 2026 rates supplied for this page, indicative prices are approximately PKR 200 per sq. ft. for 2 mm, PKR 250 per sq. ft. for 3 mm and PKR 360 per sq. ft. for 12 mm UPVC sheet. Actual quotations vary according to specification, profile, quantity and delivery.

What is the UPVC roofing sheet price in Pakistan?

The price depends on thickness, profile, dimensions, material formulation and quantity. For an accurate quotation, the required sheet specification and total roof area should be provided.

What is the price of a 12 feet roofing sheet in Pakistan?

A 12-foot sheet cannot be priced accurately from length alone. Effective cover width, thickness, profile and material rate must also be considered.

Is UPVC suitable for factory roofs?

UPVC can be used for suitable factories and industrial sheds, provided the selected product is appropriate for the structural, environmental and maintenance requirements of the building.

Is UPVC better than steel roofing?

Neither material is universally better. UPVC offers corrosion resistance and lightweight characteristics, while steel generally provides greater mechanical strength and is widely used for demanding industrial roofing.

Can UPVC sheets be used in hot areas of Pakistan?

Yes, suitable UPVC roofing products can be used in hot regions, but roof ventilation, product specification, colour, thickness, insulation and building design should all be considered.

What is the difference between UPVC and PVC roof sheets?

UPVC is unplasticized PVC. “PVC sheet” is a broader term, so customers should confirm the exact formulation and technical specification of the roofing product before comparing prices.

Are UPVC roofing sheets waterproof?

A properly selected and correctly installed profiled UPVC roofing system can provide effective weather protection. Waterproof performance depends on roof slope, overlaps, fasteners, flashing, ridge details and sealing.

Get a UPVC Roofing Sheet and Shed Quotation

If you are planning a warehouse, factory, workshop, parking shed, agricultural building or commercial roof, do not compare suppliers only by the advertised sheet price. Share the roof length, width, height, approximate area, location, required sheet thickness and intended application so the complete roofing requirement can be evaluated.

For September 2026 budgeting, the supplied indicative UPVC rates are PKR 200/sq. ft. for 2 mm, PKR 250/sq. ft. for 3 mm and PKR 360/sq. ft. for 12 mm. A final project quotation should be based on the actual specification, quantity, accessories, structure, transportation and installation requirements.

Silver Steel Mills can assist customers evaluating UPVC roofing, industrial shed roofing and related steel construction requirements in Pakistan.

UPVC Roofing Sheet in Pakistan – Price, Sizes, Thickness & Specifications

Silver Steel Mills manufactures and supplies UPVC roofing sheets in Pakistan for steel sheds, warehouses, factories, dairy farms, poultry buildings, agricultural structures and industrial roofing projects. Our UPVC roof sheets are designed as a lightweight, corrosion-resistant alternative to conventional metal roofing where thermal comfort, weather resistance and low maintenance are important.

Available thicknesses, profiles, widths and sheet lengths can be selected according to the building design, purlin spacing, wind conditions and application. Custom sizes can also be discussed for large steel shed and industrial roofing projects.

3. Product Overview

UPVC Roofing Sheets for Steel Sheds & Industrial Buildings

UPVC roofing sheets are manufactured from rigid unplasticized polyvinyl chloride and are commonly used for roofing applications where resistance to moisture and corrosion is important.

Unlike conventional steel roofing, UPVC does not rust. This makes it particularly useful in environments where the roof may be exposed to humidity, moisture, agricultural gases or corrosive industrial conditions.

Silver Steel Mills supplies UPVC roofing solutions for:

Steel sheds
Industrial warehouses
Factory buildings
Dairy sheds
Poultry sheds
Agricultural buildings
Workshops
Godowns
Car parking structures
Storage buildings
Commercial sheds
Industrial extensions
Livestock buildings

For large projects, the sheet specification should be selected together with the steel structure, purlin spacing, roof slope, wind loading and fixing system rather than selecting thickness only on price.

4. Technical Specifications

UPVC Roofing Sheet Technical Data

Specification	Available / Typical Option
Product	UPVC Roofing Sheet
Material	Rigid UPVC
Roofing Type	Corrugated / Profiled
Thickness	2.0 mm and project-specific options
Width	Profile dependent
Length	Custom cut-to-length
Surface	Weather-resistant finished surface
UV Protection	Available according to product specification
Colour	White, grey, blue and other available colours
Application	Roof and wall cladding
Installation	Steel / PEB / shed purlins
Maintenance	Low maintenance
Corrosion Resistance	Excellent against rust/corrosion
Water Resistance	Suitable for external roofing
Fabrication	Factory / project-specific cutting
Usage	Industrial, agricultural and commercial roofing

5. Thickness Options

UPVC Roofing Sheet Thickness

The thickness should be selected according to the span between purlins, roof loading, weather exposure and project requirements.

2.0 mm UPVC Roofing Sheet

A practical option for many general-purpose roofing applications where the supporting structure and purlin spacing are properly designed.

Suitable for:

Steel sheds
Workshops
Warehouses
Agricultural buildings
Dairy sheds
Poultry buildings
General industrial roofing

For heavier exposure or larger purlin spacing, a thicker profile/specification may be recommended following engineering review.

Current industry listings show UPVC roofing products in thicknesses around 1.5–3.0 mm, with 2.0 mm being a common industrial option.

6. UPVC Sheet Sizes

UPVC Roofing Sheet Length & Width

One of the major advantages for steel shed projects is that roofing sheets can be supplied according to project requirements.

Common width range

Depending on the profile, UPVC roofing sheets may be manufactured around:

3 ft – 3.5 ft overall width

The effective cover width is lower than the overall width because of side overlap.

For example, some current UPVC roofing profiles are listed around 1,050–1,130 mm overall width with approximately 960–1,000 mm effective cover width.

Length

Sheets can be supplied in project-specific lengths.

Common project lengths include:

10 ft
12 ft
15 ft
20 ft
Custom length

Longer sheets can reduce the number of horizontal joints, but the final length should be selected according to transportation, handling, roof geometry and installation requirements.

7. UPVC vs Steel Roofing Sheet

Why Use UPVC Roofing Instead of Conventional Steel?

UPVC and metal roofing serve different project requirements.

Feature	UPVC Roofing	PPGI / PPGL Steel
Rust resistance	Excellent	Depends on coating
Weight	Lightweight	Higher
Corrosion resistance	Excellent	Good–excellent depending on coating
Thermal behaviour	Lower heat transfer than metal	Metal heats quickly without insulation
Maintenance	Low	Coating maintenance may be required
Dairy/agricultural environment	Suitable	Coating selection is important
Industrial shed	Suitable	Excellent
Structural strength	Profile dependent	High
Custom length	Available	Available
Installation	Roofing purlins	Roofing purlins

8. UPVC Roofing for Steel Sheds

UPVC Sheet for Steel Shed Roof

Silver Steel Mills can integrate UPVC roofing sheets with Pre-Engineered Buildings and fabricated steel shed structures.

A typical roof system consists of:

Steel Rafters → Z/C Purlins → UPVC Roofing Sheets → Roofing Fasteners & Flashings

The roof design should consider:

Purlin spacing
Roof slope
Sheet profile
Side overlap
End lap
Wind uplift
Fastener type
Thermal movement
Drainage
Ridge flashing
Gutter arrangement

This is particularly important for large industrial sheds where the roofing material and steel structure must work as one system.

9. UPVC for Dairy & Poultry Sheds

UPVC Roofing Sheet for Dairy Farms & Poultry Buildings

UPVC roofing is particularly useful where the roof is exposed to moisture and corrosive atmospheric conditions.

Applications include:

Dairy Sheds

UPVC can be considered for:

Dairy farms
Cattle sheds
Milking areas
Feed storage
Livestock shelters

Poultry Sheds

Suitable applications can include:

Poultry houses
Broiler sheds
Layer houses
Feed storage
Agricultural buildings

The advantage is that UPVC itself does not suffer from conventional iron rusting, although the complete roof system—including fasteners, supporting steel and flashings—still needs appropriate corrosion protection.

10. Weather & Corrosion Resistance

Weather-Resistant UPVC Roofing

UPVC roofing is selected in many projects because of its resistance to moisture and corrosion.

It can be particularly useful where conventional steel sheets may require additional corrosion protection.

Potential environments include:

Humid industrial areas
Dairy farms
Poultry farms
Agricultural sheds
Chemical-exposure areas
Coastal/humid environments

However, the actual performance depends on the resin formulation, UV stabilisation, profile, thickness and manufacturing quality.

Industry product specifications commonly highlight UV/weather resistance and corrosion resistance as key UPVC roofing characteristics.

11. UPVC Roofing & Pakistan Climate

UPVC Roofing Sheet for Hot Weather

Pakistan’s summer climate makes roof heat management an important design consideration.

UPVC roofing can reduce the rapid heat absorption associated with exposed metal roofing. However, for temperature-sensitive buildings, roof insulation, ventilation and building orientation should also be considered.

For industrial buildings requiring better thermal control, Silver Steel Mills can combine UPVC roofing with:

Glasswool insulation
EPS sandwich panels
PU/PIR sandwich panels
Ventilation systems
Ridge ventilation
Proper roof slope

This allows the roofing system to be designed according to the actual building application rather than using the same roof specification for every project.

12. Installation

UPVC Roofing Sheet Installation on Steel Structure

Proper installation is essential for roofing performance.

Typical installation considerations include:

Check purlin alignment.
Confirm roof slope and drainage direction.
Maintain the recommended side overlap.
Use suitable roofing fasteners with sealing washers.
Avoid excessive tightening.
Allow for thermal movement where required.
Install ridge and edge flashings correctly.
Seal vulnerable joints according to the roofing system.
Maintain correct purlin spacing.
Inspect the completed roof for leakage and fixing problems.

Do not specify a universal purlin spacing on the page. It varies with the actual sheet profile, thickness, wind loading and structural design.

13. UPVC Roofing Sheet Applications

Where Can UPVC Roofing Sheets Be Used?

Silver Steel Mills supplies UPVC roofing solutions for multiple sectors:

Industrial

Factories
Steel mills
Workshops
Manufacturing plants
Warehouses

Agriculture

Dairy farms
Poultry farms
Cattle sheds
Agricultural storage
Farm buildings

Commercial

Shops
Commercial sheds
Car parking
Storage buildings
Market structures

Infrastructure

Temporary buildings
Site offices
Storage areas
Industrial extensions

14. UPVC Roofing With PEB

UPVC Roofing for Pre-Engineered Buildings

UPVC sheets can be incorporated into selected PEB and steel shed projects depending on structural requirements.

Silver Steel Mills provides complete steel building solutions including:

Primary steel frames
Built-up H-sections
Tapered I-sections
Rafters
Columns
Z-purlins
C-purlins
Wall girts
Bracing
Roofing sheets
Wall cladding
Flashings
Insulation systems

This gives the customer the option to purchase the steel structure and roofing system as an integrated project solution.

15. UPVC vs PPGI vs PPGL

Which Roofing Sheet Is Better?

There is no single roofing sheet that is best for every project.

Choose UPVC when:

Corrosion resistance is important.
The building is agricultural or livestock related.
Lightweight roofing is preferred.
Lower maintenance is desired.
The application suits a non-metallic roofing profile.

Choose PPGI when:

A conventional metal roof is required.
Structural strength is important.
Industrial roofing is required.
A wide range of colours and profiles is required.

Choose PPGL when:

Higher corrosion/weather resistance is required.
The project has demanding outdoor exposure.
A coated metal roofing system is preferred.

Silver Steel Mills can help select the appropriate roofing material according to the building’s environment, structure and budget.

16. Why Buy UPVC Roofing Sheets from Silver Steel Mills?

Silver Steel Mills – Roofing & Steel Building Manufacturer in Pakistan

Silver Steel Mills provides roofing materials alongside its steel fabrication, PEB and industrial building solutions.

Our approach is not simply to sell a roofing sheet. We can evaluate the roofing material together with the structure underneath it.

Our capabilities include:

UPVC roofing sheets
PPGI roofing sheets
PPGL roofing sheets
Steel shed structures
PEB buildings
Sandwich panels
EPS panels
PU/PIR panels
Steel purlins
Roofing accessories
Industrial fabrication
Complete steel shed solutions

For large projects, customers can request a technical quotation based on:

Building length × building width × eave height × roof slope × purlin spacing × location × roofing material × thickness.

17. UPVC Roofing Sheet Price in Pakistan

UPVC Sheet Price Depends on Specification

Instead of putting one permanent price on the page, I recommend this wording:

The price of UPVC roofing sheets in Pakistan depends on thickness, profile, width, length, colour, quantity, transportation and project requirements.

For an accurate quotation, send:

Required quantity
Sheet thickness
Sheet length
Building dimensions
Roof area
Location
Required colour
Steel structure details, if available

Get Current UPVC Roofing Sheet Price & Project Quotation

This is much better than putting a fake/static price because your actual market rate changes.

18. FAQ — Very Important for SEO

Frequently Asked Questions About UPVC Roofing Sheets

What is a UPVC roofing sheet?

UPVC roofing sheet is a rigid, profiled roofing material manufactured from unplasticized polyvinyl chloride and used for industrial, agricultural, commercial and steel-shed roofing applications.

What thickness of UPVC roofing sheet is available?

Silver Steel Mills can supply 2.0 mm UPVC roofing sheets, with other specifications subject to profile and project requirements.

What is the standard width of UPVC roofing sheets?

Width depends on the profile. Industrial UPVC profiles commonly fall around the 3–3.5 ft range, while the effective cover width is reduced by side overlap.

Can UPVC roofing sheets be made in custom lengths?

Yes. Project-specific lengths can be discussed depending on manufacturing, transportation and installation requirements.

Is UPVC roofing better than steel?

It depends on the project. UPVC offers excellent corrosion resistance and low maintenance, while PPGI/PPGL steel provides different structural and roofing characteristics. The correct choice depends on the building design and environment.

Can UPVC sheets be used on steel sheds?

Yes. UPVC roofing sheets can be installed on appropriately designed steel purlins and shed structures.

Can UPVC sheets be used for dairy sheds?

Yes. UPVC is commonly considered for agricultural and livestock buildings because it is resistant to conventional rusting and suitable for moisture-exposed environments.

Are UPVC roofing sheets waterproof?

A properly installed UPVC roofing system can provide weather-resistant roof coverage. Waterproof performance depends on sheet profile, overlaps, fasteners, flashings, roof slope and installation quality.

Do UPVC roofing sheets rust?

No. UPVC itself does not rust like conventional iron or steel.

Can Silver Steel Mills provide a complete steel shed with UPVC roofing?

Yes. Silver Steel Mills can provide roofing material along with steel structural fabrication and related building systems according to the project requirement.

uPVC Sheet for Roof Buildings Shed Price in Pakistan – Premium Quality at PKR 360/sft

In Pakistan’s ever-evolving construction and industrial market, uPVC roofing sheets are gaining massive popularity due to their cost-effectiveness, strength, and weather-resistant features. Whether you’re looking to roof a warehouse, commercial shed, factory, or cladding panels, uPVC sheets offer a modern, reliable, and maintenance-free alternative to metal roofing systems. At a competitive price of PKR 280 per square foot, our premium s-type single uPVC sheets are the ideal solution for builders and contractors seeking durability and affordability.

🔷 What is a uPVC Sheet?

Unplasticized Polyvinyl Chloride (uPVC) is a rigid plastic material known for its resistance to chemicals, corrosion, and weathering. When molded into corrugated roofing sheets, uPVC becomes an exceptional material for roofing and cladding applications. Unlike traditional metal or asbestos options, uPVC sheets are lighter, rust-free, UV-resistant, and require virtually no maintenance.

✅ Applications of uPVC Sheets in Pakistan

Our uPVC sheets for sale in Pakistan are ideal for:

Industrial & commercial roofing
Factory sheds
Warehouses
Poultry farms
Agricultural storage units
Sound barriers & wall partitions
Residential garages or extensions

🛠️ Premium Features of Our uPVC Roofing Sheets

1. Durability and Weather Resistance

100% rust-proof & corrosion-resistant
High resistance against UV rays, moisture, and harsh weather
No discoloration or cracking even in coastal or humid areas

2. Cost-Effective & Maintenance-Free

Price: PKR 280 per square foot
Long lifespan without the need for painting or treatment
Ideal alternative to inferior metal roofing systems

3. Lightweight & Easy to Install

Saves labor cost
No heavy machinery required
Can be shaped, welded, or jointed with standard tools

4. Fire & Chemical Resistance

Self-extinguishing material
Withstands exposure to acids, alkalis, and salt
Suitable for industrial chemical storage and coastal locations

5. Aesthetic & Color Options

Available in white, blue, green, and grey shades
Modern appearance enhances the architectural appeal
Glossy smooth surface improves aesthetics for cladding & façades

🧱 Types of uPVC Sheets Available in Pakistan

▶️ Low Ridge Twin Wall Corrugated uPVC Sheets

Designed with air pockets between layers, these sheets offer:

Higher insulation
Enhanced durability
Sophisticated look for upscale warehouses and factories
Perfect for roofing and vertical wall cladding

▶️ High Ridge Twin Wall Corrugated uPVC Sheets

Ideal for:

Heavy-duty use
Extreme climates (hot or cold)
Excellent leak-proof jointing system
Extra strength against high winds and pressure

🏢 UPVC Cladding Sheets in Pakistan

If you’re searching for “uPVC cladding sheets manufacturer Pakistan,” look no further. Our uPVC cladding sheets offer:

Versatility for interior and exterior walls
Easy maintenance
Custom sizes and color options
Moisture resistance and improved insulation

They are ideal for:

Food processing facilities
Clean rooms
Cold storage units
Decorative building facades

📦 uPVC Corner Columns for Modern Architecture

For a refined finish to any structure, our uPVC Corner Columns:

Add protection and aesthetics to building corners
Come in multiple sizes, colors, and textures
Require no painting or regular upkeep
Withstand physical impact in high-traffic areas

💧 Exclusive: Wave Gutters – Only by Our Factory

We proudly manufacture Pakistan’s only Wave Gutters using premium uPVC material:

Dimensions: 200mm × 160mm
Designed for efficient rainwater drainage
Lightweight, rust-free, and UV-resistant
Seamless joints ensure a leak-proof system

🔥 Temperature & Fire Resistance of uPVC Sheets

🔹 Heat Tolerance

Withstands up to 90°C
UV-stabilized surface resists sun degradation

🔹 Cold Resistance

Performs well in temperatures as low as -20°C
Maintains structural integrity in snow and frost

🔹 Fire Resistance

Self-extinguishing in case of fire
Will not contribute to flame spread

📏 25mm Hollow-Core uPVC Roofing Sheets – Heavy Duty Performance

Engineered for maximum strength and insulation, these sheets feature:

Hollow core for thermal insulation and soundproofing
High resistance to rain, snow, and wind pressure
Ideal for factories, warehouses, and schools

Key Benefits:

Superior sound insulation
Fire retardant
UV stabilized
Easy to install and maintain

🛒 UPVC Sheet Price in Pakistan

Sheet Type	Price (PKR per ft²)	Use Case
S-Type Single Wall UPVC Sheet	280	General roofing/cladding
Low Ridge Twin Wall UPVC Sheet	300–320	High-end commercial use
High Ridge Twin Wall UPVC Sheet	320–350	Extreme weather applications
Hollow 25mm UPVC Roofing Sheet	340–380	Heavy-duty insulation projects
UPVC Corner Column (per foot)	150–200	Decorative & protective design
UPVC Wave Gutter System (per ft)	180–220	Rainwater drainage systems

📍 Why Choose Us?

Direct manufacturer – no middleman costs
Bulk delivery across Pakistan
Custom sizes, colors & profiles
Full installation support
Trusted by contractors, builders & industries nationwide

📞 Contact Us to Buy uPVC Sheets in Pakistan

Looking for uPVC roofing sheets for sale in Pakistan? Whether it’s for a shed, warehouse, cladding, or rain gutter system, our expert team is ready to help. Call now for bulk order discounts and installation services across all major cities including Lahore, Karachi, Islamabad, Faisalabad, and Peshawar.

The Rise of uPVC Sheets in Pakistan’s Roofing Market

In Pakistan’s evolving construction landscape, the demand for cost-effective, durable, and low-maintenance materials is at an all-time high. Among the most popular innovations is the uPVC (Unplasticized Polyvinyl Chloride) sheet, an alternative to traditional metal or asbestos roofing materials. Whether you’re building a factory, warehouse, poultry shed, or residential shed, uPVC roofing sheets offer a long-lasting and efficient solution. Priced competitively at just PKR 280 per square foot, they combine strength, safety, and style.

Why Choose uPVC Sheets Over Traditional Roofing Materials?

1. Weather Resistance & Durability
uPVC sheets are engineered to endure Pakistan’s harsh climate—from scorching summers to heavy monsoon rains. Unlike metal sheets, they don’t rust, warp, or degrade, making them a smart choice for cities like Lahore, Karachi, Islamabad, Faisalabad, and coastal areas where humidity is high.

2. Superior Insulation
Thanks to their multi-wall hollow design, uPVC sheets offer excellent thermal and acoustic insulation. They keep interiors cooler in summer and warmer in winter, reducing energy costs. This makes them ideal for industries that require controlled internal environments such as cold storage facilities, warehouses, and commercial sheds.

3. Lightweight Yet Impact-Resistant
Despite their strength, uPVC sheets are extremely lightweight. This makes transportation, handling, and installation quicker and more cost-efficient. Their flexibility and toughness also make them resistant to hail, storm damage, and physical impacts.

4. Fire & Chemical Resistance
uPVC sheets have fire-retardant properties and are resistant to a wide range of chemicals, making them suitable for chemical plants, fertilizer warehouses, and food processing units. Their non-toxic, anti-corrosive nature ensures safety and long-term performance.

uPVC Roofing Sheets for Sale in Pakistan

If you’re looking for uPVC roofing sheets for sale in Pakistan, now is the best time to invest. With a base price of only PKR 280 per square foot, the benefits outweigh the cost significantly. Bulk orders and long-term supply arrangements are available for construction companies, government projects, and industrial contractors.

Popular applications:

Industrial Warehouses
Agricultural Storage Units
Commercial Sheds
Poultry Farms
Factories
Parking Areas

Product Specifications: Premium S-Type Twin Wall uPVC Sheets

Material: Virgin uPVC Resin
Thickness: 25mm Twin Wall
Profile: S-Type Low Ridge / High Ridge Corrugated
Width: 1.13 meters (Approx.)
Length: Custom cut sizes available
Colors: White, Blue, Green, Light Grey
Fire Rating: Class B1 (Self-extinguishing)
UV Resistance: Yes
Warranty: Up to 10 years (depending on installation and location)

uPVC Cladding Sheets – Aesthetic and Functional

In addition to roofing, uPVC cladding sheets are gaining traction as a modern, maintenance-free wall solution. Ideal for commercial buildings, shopping malls, corporate offices, and factories, these cladding sheets offer an aesthetic upgrade while also protecting exterior walls from heat, rain, and chemical damage.

Manufacturer & Supplier of uPVC Roofing and Cladding Sheets in Pakistan

We are a leading uPVC sheet manufacturer in Pakistan, offering a wide variety of roofing, cladding, and wall panel solutions tailored to different sectors. Our manufacturing process complies with international quality standards, ensuring long-term performance, even in the toughest environments.

We also manufacture:

Wave Gutters
uPVC Corner Columns
uPVC Ceiling Panels
uPVC Partition Panels

Our products are used extensively in:

Government Projects
Commercial Buildings
Industrial Plants
Agricultural Infrastructure

Key Benefits of Our UPVC Roofing Sheets

Feature	Benefit
Non-Corrosive	Will not rust in rain or humidity
UV Resistant	Doesn’t fade or become brittle under sunlight
Thermal Insulation	Keeps interiors cooler
Noise Reduction	Absorbs rain and outdoor sounds
Fire Retardant	Self-extinguishing material
Eco-Friendly	Recyclable and free from toxic metals
Customizable	Available in various lengths, colors, and profiles

Applications Across Industries

Industry	Use Case
Agriculture	Poultry Sheds, Grain Storage
Warehousing	Large-span Roofing, Cladding
Commercial	Showrooms, Petrol Stations
Factories	Equipment Sheds, Chemical Storage
Transport	Parking Sheds, Bus Stations
Residential	Patio Roofs, Garages, Sheds

How to Order uPVC Roofing Sheets in Pakistan

Step 1: Measure the roofing/cladding area in square feet.
Step 2: Select profile (High Ridge, Low Ridge, S-Type) and color.
Step 3: Contact our sales team for quotation and delivery schedule.
Step 4: Place your order and arrange delivery or pick-up.

We offer nationwide delivery across Pakistan and full support during installation and after-sales services.

🔧 Technical Insights: Why uPVC Sheets Lead in Performance

1. Multi-Layered Insulation Technology

Our premium S-type uPVC sheets come with hollow twin-wall construction. This design not only adds extra strength and stiffness but also creates an insulating air gap that reduces heat transfer.

2. UV-Protection Layer

To withstand harsh sun in cities like Multan, Hyderabad, or Quetta, the exterior surface is treated with a UV-protective coating, ensuring no fading, cracking, or brittleness over time.

3. Self-Cleaning Surface

The smooth, non-porous surface allows dust and rainwater to wash off easily, keeping your roofs and claddings clean without extra maintenance.

4. Wind and Load Resistance

Tested to withstand high wind pressures, uPVC sheets are ideal for coastal areas, mountainous zones, and open industrial sites. Their tensile strength helps resist damage from flying debris or heavy rooftop installations like solar panels.

🏭 Where Our uPVC Sheets Are Used – Real Projects in Pakistan

✔️ Government Warehouses – Installed in Punjab Food Department warehouses for grain storage.
✔️ Poultry Farms in Sindh – Preferred for temperature control and hygiene in Thatta and Mirpurkhas regions.
✔️ Textile Units in Faisalabad – Providing thermal insulation in dyeing and finishing halls.
✔️ Solar Farms in Baluchistan – Roof shelters for inverters and control rooms.
✔️ Metro Bus Stations – Used as cladding panels at terminals and parking stations.

🛠️ Accessories & Custom Solutions

We also supply matching accessories to complete your roofing system:

Sidewall Flashings
End Closures
Waterproof Screws with Rubber Washers
Gutters and Downpipes
uPVC Ridge Sheets for Tiling Roofs

Optional services:

On-site measurement and planning
3D roof layout designs
Installation services in major cities of Pakistan

📞 Order Now & Build Smart

We offer:

Direct-from-factory pricing
Fast delivery all over Pakistan
Bulk rates for projects
After-sale technical support

Whether you’re a builder, architect, government contractor, or individual investor, our uPVC sheets are the perfect material for lasting value and peace of mind.

🧰 Installation Guide: How to Install uPVC Sheets in Pakistan (Step-by-Step)

Installing uPVC roofing or cladding sheets is a straightforward process, especially when using our factory-cut and UV-stabilized panels. Here’s a professional step-by-step installation guide tailored for projects across Pakistan.

🔧 Tools and Equipment Needed:

Measuring tape
Power drill with appropriate bits
Waterproof self-drilling screws with washers
Angle grinder or hand saw (for cutting sheets)
Silicone sealant (for joints)
PPE (gloves, goggles, mask)

🪜 Step-by-Step uPVC Sheet Installation Process

Step 1: Prepare the Framework

Frame Material: Use MS square pipe, GI pipe, or aluminum angles depending on your structure type.
Spacing: Recommended purlin distance is 24 to 36 inches (600–900 mm).
Ensure the frame is level and properly anchored to the roof or wall surface.

Step 2: Lay Out the Sheets

Start placing sheets from the downwind edge of the roof to ensure water flows over the overlaps.
Overlap sheets by at least 1 corrugation on the side and 6 inches (150 mm) on the ends.
Leave a 2–3 mm gap between ends to allow for thermal expansion.

Step 3: Fastening the Sheets

Use galvanized or stainless steel self-drilling screws with neoprene washers.
Screw at the top of corrugation to prevent water leaks.
Fix screws at every second corrugation on the sides, and on every purlin along the length.

Step 4: Sealing Joints and Ridges

Use silicone or rubberized sealant on sheet overlaps and ridge areas.
Install matching ridge caps or flashing to prevent water ingress at the peak of pitched roofs.

Step 5: Final Checks

Ensure all sheets are aligned.
Trim excess edges using a fine-tooth blade or angle grinder.
Check for any exposed gaps or missing fasteners.

🛡️ Pro Tips for Best Results

Avoid over-tightening screws, as this may damage the sheet or crack the washer.
Install on clear, dry days to prevent slipping or poor sealing.
Use lighter-colored sheets (white, ivory, beige) in hotter areas to reflect heat.
Leave at least 1-inch overhang on eaves to allow water runoff without dripping onto the wall.

📍 uPVC Sheet Dealer Network – Available Across Pakistan

We supply and deliver factory-direct to all major regions. Our authorized dealers and distributors are active in:

✅ Punjab:

Lahore, Faisalabad, Multan, Sargodha, Sialkot, Gujranwala

✅ Sindh:

Karachi, Hyderabad, Sukkur, Larkana, Nawabshah

✅ Khyber Pakhtunkhwa:

Peshawar, Mardan, Abbottabad, Swat

✅ Balochistan:

Quetta, Hub, Gwadar

✅ Azad Kashmir & Gilgit-Baltistan:

Muzaffarabad, Mirpur, Gilgit, Skardu

We also offer bulk dispatch via Daewoo Cargo and NLC Logistics for quick delivery to any location.

💬 Customer Testimonials – Real Feedback from Pakistani Projects

🏢 “We used the SSM uPVC sheets for our warehouse in Faisalabad. The installation was smooth, and we’ve seen a big difference in temperature. No rust, no heat!”
— Rashid Ali, Industrial Client

🐔 “Perfect for our poultry farm. Clean, easy to wash, and keeps the sheds much cooler. The anti-corrosion benefit is a game-changer.”
— Muhammad Farooq, Poultry Farm Owner, Kasur

🏠 “I installed these sheets for my farmhouse roofing. No leaks even during the monsoon season. Best part — zero maintenance!”
— Hassan Raza, Individual Builder

🛒 Ready to Place an Order?

Minimum Order: 200 sq.ft
Custom Sizes: Available on request
Payment Terms: 50% advance, 50% on delivery
Delivery Time: 2–5 working days (depending on city)

Contact Us Today to get a free quotation, site assessment, and samples delivered to your doorstep.

🌍 Export Quality uPVC Sheets – Global Standards from Pakistan

Silver Steel Mills proudly manufactures export-grade uPVC sheets that meet international standards for durability, heat resistance, and long service life. Our products are not just serving projects across Pakistan but are also being exported to the Middle East, Africa, and Central Asia.

✈️ uPVC Sheets Export from Pakistan – Global Reach

We have successfully exported uPVC sheets to:

UAE (Dubai, Sharjah, Abu Dhabi)
Saudi Arabia (Riyadh, Jeddah, Dammam)
Qatar (Doha)
Oman, Bahrain
Afghanistan and Tajikistan
African countries including Kenya, Tanzania, and Nigeria

Each shipment is handled with export-compliant packaging, ISPM-certified wooden pallets, and custom documentation for smooth customs clearance.

📦 Export Packaging & Container Details

Container Type	Load Capacity	Area Coverage	Sheet Thickness	Packaging Type
20 ft Container	~8–10 tons	~4,000–5,000 sq.ft	2.0 mm, 2.5 mm	Palletized & Wrapped
40 ft HQ	~18–20 tons	~8,000–10,000 sq.ft	2.5 mm, 3.0 mm	Export Wooden Pallets

Packing Inclusions:

Plastic-wrapped bundles
Edge guards to avoid transport damage
Custom label with thickness, size, and quantity

📋 Documents Provided for Export Shipments

Commercial Invoice
Packing List
Certificate of Origin (COC)
Bill of Lading (B/L)
Pre-shipment Inspection Report (if required)
Phytosanitary Certificate for wood pallets

We also help with LC (Letter of Credit), T/T (Telegraphic Transfer), and D/P (Documents Against Payment) methods.

🌡️ Why Our uPVC Sheets are Ideal for Gulf and African Climates

Feature	Benefit in Export Regions
UV Stabilized	Withstands intense sun exposure
No Metal Content	Zero rust in salty coastal air
Heat Insulating	Ideal for hot desert environments
Flame Retardant (Optional)	Safer for residential projects
Easy to Clean	Perfect for dusty and dry zones

🏢 Industries We Serve in Export Markets

Warehouses & Logistics Parks
Farm Houses & Poultry Sheds
Labour Camps & Portacabin Roofs
Car Parking Sheds
Commercial Market Roofing
Cold Storage Facilities

💲 Competitive Export Pricing – Direct from Manufacturer

We offer FOB Karachi and CIF (Port-to-Port) rates, depending on buyer preference. All shipments come directly from our manufacturing plant, ensuring:

Zero middlemen
Guaranteed quality control
Factory-direct rates

📞 How to Book Export Orders?

Send your requirements (sheet size, thickness, quantity, destination port)
Receive quotation & sample dispatch
Confirm PI and make advance
Manufacturing + Dispatch (5–7 days typical)
Receive shipment with all documents

❓ Frequently Asked Questions (FAQs) About uPVC Sheets in Pakistan

Here are the most common questions asked by clients, resellers, and contractors regarding uPVC sheets from Silver Steel Mills:

🔧 1. What is the standard size of your uPVC roofing sheets?

Our standard sheet sizes are:

Width	Length Options	Thickness Options
3.5 feet (42 inches)	8, 10, 12, 14, 16 feet	1.5mm, 2mm, 2.5mm, 3mm, 4mm

We also offer custom-cut lengths based on your project needs.

🔥 2. Are uPVC sheets heat resistant?

Yes! uPVC roofing sheets are excellent thermal insulators. They reduce heat transfer, making them ideal for hot climates like Pakistan and the Middle East. Many of our clients report up to 5–8°C lower temperatures inside compared to metal or asbestos sheets.

🔊 3. Do they reduce sound/noise?

Yes. Our sheets have natural sound-absorbing properties. Rain, traffic, or industrial noise is significantly minimized. That’s why they’re popular in factories, poultry farms, and schools.

🌧️ 4. Are uPVC sheets waterproof?

Absolutely. Our sheets are 100% leak-proof and do not absorb water. The multi-ribbed profile ensures water flows off smoothly, even during heavy monsoon rains.

🦠 5. Will uPVC sheets rust or corrode?

No. Unlike metal sheets, uPVC roofing does not rust or corrode. This makes them ideal for:

Coastal areas (Karachi, Gwadar, Thatta)
Chemical factories
High-humidity zones

🔧 6. How are uPVC sheets installed?

Installation is easy and similar to metal sheets:

Use self-drilling screws with rubber washers
Overlap each sheet by 1 wave/rib
Use J or L hooks for steel structures

We provide installation guides or can connect you with experienced fitters nationwide.

🧽 7. How do you clean uPVC sheets?

Use a soft brush or water hose. No acid or heavy chemicals are needed. Dirt or dust washes off easily. This makes maintenance extremely simple.

🔄 8. Can these sheets be reused or recycled?

Yes! Our uPVC sheets are recyclable and eco-friendly. They last up to 25 years, and at the end of life, they can be reprocessed into secondary uPVC products.

📦 9. What is your delivery time?

In-stock items: 1–2 days in major cities
Custom orders or exports: 5–7 working days
Export packing, loading, and documents are done in-house.

🏷️ 10. Do you offer discounts on bulk orders?

Yes. We offer factory-direct pricing, and the following discounts apply:

Quantity	Discount Offered
5000+ sq.ft	5%
10,000+ sq.ft	7–10%
Container Load	Special export rates

🛡️ 11. Do uPVC sheets come with a warranty?

Yes. We provide:

5 years warranty against fading or brittleness (under normal use)
Free replacement in case of manufacturing defect

📞 12. How can I order?

You can call us, WhatsApp, or visit our Lahore factory. We also take orders through:

B2B buyers
Resellers
Construction companies
Government procurement tenders

📞 How to Order uPVC Sheets from Silver Steel Mills

At Silver Steel Mills, we make the process of purchasing uPVC sheets fast, simple, and customer-friendly. Whether you’re a contractor, business owner, builder, or exporter, our team is ready to assist you with reliable products and timely service.

📝 Step-by-Step Ordering Guide

✅ Step 1: Select Sheet Type and Size

Choose from our variety of:

Sheet Types: Single layer uPVC, Triple layer ASA-uPVC, Corrugated or Flat
Widths Available: 3.5 ft (standard)
Lengths Available: 8ft, 10ft, 12ft, 14ft, 16ft, or customized
Thickness Options: 1.5mm, 2mm, 2.5mm, 3mm, 4mm

You can send us your BOQ (Bill of Quantity) or simply tell us the total square footage required.

✅ Step 2: Get Quotation

Updated wholesale pricing
Bulk order discounts
Export rates and container pricing

We provide instant quotations on WhatsApp or Email.

✅ Step 3: Place Your Order

You can place your order via:

Phone Call / WhatsApp
Visit to our factory showroom
Email purchase order

We’ll confirm the details, invoice, and expected delivery date.

✅ Step 4: Payment Terms

We accept the following methods:

Bank transfer
Cash deposit
Advance booking for large orders

For export clients, we support LC (Letter of Credit) and TT transfer.

✅ Step 5: Delivery

We deliver across:

All cities of Pakistan (Karachi, Lahore, Islamabad, Multan, Faisalabad, Quetta, Peshawar)
Export to Afghanistan, UAE, Saudi Arabia, Africa

Delivery options:

Self-pickup
Truck/bus cargo
Doorstep delivery (on special request)

🌍 Export Options (International Buyers)

We export uPVC sheets to:

UAE (Dubai, Sharjah, Abu Dhabi)
Saudi Arabia
Qatar
Oman
Afghanistan
African countries (Nigeria, Kenya, Ghana)

We handle:

Custom clearance
Packing in export pallets
Shipping & documentation

🤝 Why Buy from Silver Steel Mills?

✅ Factory-Direct Rates
✅ ISO-Standard Manufacturing
✅ Bulk Stock Availability
✅ Export Packing & Timely Dispatch
✅ Excellent After-Sales Support

📲 Contact Us

Silver Steel Mills – Pakistan’s Leading uPVC Sheet Manufacturer

📍 Main Factory Address:
17 KM Ferozepur Road, Lahore, Pakistan

📧 Email:
info@Silversteelmills.com

🌐 Website:
www.Silversteelmills.com

🕒 Factory Timings:
Monday to Saturday: 9 AM to 6 PM

📦 Ready to Place Your Order?

Send us your requirement now on WhatsApp and get an instant quote.
We’re here to help you build with quality and trust.