Description
SSM 15 Block Machine in Pakistan
SSM 15 Automatic Block Making Machine | Silver Steel Mills
Silver Steel Mills SSM 15 is an automatic single-trolley concrete block, paver and tuff tile making machine manufactured in Pakistan for commercial construction-material production. The machine is designed for customers who need a compact, reliable and economical automatic production system for concrete pavers, blocks, bricks, tuff tiles and other compatible molded concrete products.
The SSM 15 combines a hydraulic pressure system, high-power vibration, automatic pallet handling, aggregate mixing, conveyor feeding and an electrical control panel into one integrated production setup.
Silver Steel Mills manufactures and supplies the SSM 15 block machine in Pakistan with technical installation and machine commissioning support.
SSM 15 Block Machine – Technical Specifications
| Specification | SSM 15 Technical Detail |
|---|---|
| Machine Model | SSM 15 |
| Machine Type | Automatic Single |
| Operating System | Automatic pallet and single trolley system |
| Production Capacity | 100–110 pallets per hour |
| Molding Cycle | 25–35 seconds |
| Product Height | 50–200 mm |
| Paver Capacity per Pallet | 15 rectangular pavers |
| Block Configuration | Up to 6-block configuration according to mould |
| Wooden Pallet Size | 650 × 750 × 28 mm |
| Vibration Motors | 2 × 10 HP = 20 HP |
| Hydraulic Pump Motor | 20 HP |
| Mixer Motor | 20 HP |
| Conveyor Gear Motor | 3 HP |
| Total Connected Capacity | Approximately 63 HP |
| Hydraulic Oil Capacity | 400 litres |
| Hydraulic System | Imported hydraulic pressure system |
| Hydraulic Pump | Imported |
| Hydraulic Control Assembly | Imported |
| Electrical Panel | Silver Steel Mills |
| Machine Mould | Interchangeable mould system |
| Material Mixing | Aggregate mixer with motor and gearbox |
| Material Feeding | Conveyor system |
| Pallet Handling | Automatic pallet / single trolley system |
These specifications are taken from the SSM 15 quotation supplied by Silver Steel Mills.
What Can the SSM 15 Block Machine Produce?
The SSM 15 is designed as a multi-product concrete molding machine. With the appropriate mould, it can be configured for products such as:
- Concrete paver blocks
- Tuff tiles
- Interlocking pavers
- Solid concrete blocks
- Hollow blocks
- Concrete bricks
- Other compatible concrete masonry products
The exact production quantity per pallet depends on the mould design, product dimensions, product height and production configuration.
For the supplied SSM 15 specification, the machine is listed with 15 rectangular pavers per pallet and product height capability of 50–200 mm.
SSM 15 Production Capacity
The SSM 15 is specified for:
100–110 pallets per hour
with a molding cycle of approximately:
25–35 seconds
Actual daily production will depend on:
- Product size
- Mould configuration
- Product thickness
- Concrete mix design
- Aggregate quality
- Cement ratio
- Operator experience
- Labour efficiency
- Electricity supply
- Material availability
- Machine operating conditions
Therefore, production should be calculated according to the specific product and mould, rather than using one production figure for every type of block or paver.
Automatic Pallet & Single Trolley System
The SSM 15 uses an automatic pallet and single trolley operating system.
The system is designed to move pallets through the production cycle while reducing unnecessary manual handling.
The supplied specification specifically identifies the SSM 15 as an Auto pallet and single trolley system.
This configuration makes the SSM 15 suitable for customers who want an automatic production machine without moving directly to a larger multi-trolley industrial plant.
Heavy-Duty Hydraulic System
Hydraulic pressure is an important part of concrete block and paver production because controlled pressure helps the moulding system form the concrete mixture into the required product shape.
The SSM 15 includes:
- Hydraulic pressure system
- Hydraulic pressure pump
- Hydraulic temperature meter
- Hydraulic control/operating assembly
- Hydraulic pressure piping and fittings
- Hydraulic oil reservoir/system
- Movable hydraulic jack
The quotation specifies a 400-litre hydraulic oil capacity, with the hydraulic oil to be provided by the buyer.
High-Power Vibration System
The SSM 15 incorporates two vibration motors with a combined rated power of 20 HP.
Vibration Motor Configuration
10 HP × 2 = 20 HP
The vibration system helps distribute and compact the semi-dry concrete mixture inside the mould.
Proper vibration is particularly important for:
- Paver production
- Tuff tile production
- Solid blocks
- Concrete bricks
- Dense molded products
The final product strength, density and finish also depend on the mix design, aggregate grading, cement content, moisture level, mould condition and curing process.
Aggregate Mixer & Material Feeding System
The SSM 15 production setup includes an aggregate mixer machine with motor and gearbox, together with a conveyor system for material movement.
The supplied quotation lists:
- Aggregate mixer machine
- Mixer motor and gear
- Conveyor
- Imported conveyor belt
- Gearbox
- Electrical motors
The mixer is designed to prepare the concrete mixture before it reaches the block-making machine.
Typical Production Flow
Aggregate Storage → Mixing → Conveyor Feeding → Mould Filling → Hydraulic Compression → Vibration → Pallet Handling → Curing
This allows the SSM 15 to function as a production system rather than simply a standalone hydraulic press.
SSM 15 Electrical Power Requirement
The supplied SSM 15 specification lists the following connected motor capacities:
| Equipment | Motor Capacity |
|---|---|
| Vibration Motors | 20 HP |
| Hydraulic Pump Motor | 20 HP |
| Mixer Motor | 20 HP |
| Conveyor Gear Motor | 3 HP |
| Total | 63 HP |
The actual operating electrical consumption can vary depending on machine loading, operating cycle, motor efficiency and production conditions.
SSM 15 Moulding Height
The SSM 15 is specified for products with a height/thickness range of:
50 mm – 200 mm
This gives the machine flexibility for different mould configurations and concrete products.
The final product dimensions and number of products per pallet depend on the mould installed on the machine.
SSM 15 Wooden Pallet Specification
The supplied SSM 15 quotation specifies:
650 × 750 × 28 mm
wooden pallet dimensions.
Pallet dimensions and mould configuration should always be matched before ordering additional moulds or pallets.
SSM 15 Mould / Die System
Silver Steel Mills supplies the SSM 15 with a mould/die configuration suitable for the customer’s required product.
Different mould designs can be used for different products, subject to machine compatibility.
Possible configurations include:
- Paver mould
- Tuff tile mould
- Block mould
- Brick mould
- Interlocking tile mould
- Custom product mould
Important: production capacity should not be assumed to be the same for every mould. A larger or thicker product will generally produce fewer pieces per pallet than a smaller product.
SSM 15 Machine Components
The supplied SSM 15 documentation includes the following major components:
Main Machine
- Complete SSM 15 single-portion machine
- Heavy-duty machine structure
- Die/mould
- Roller conveyor
- Movable hydraulic jack
- Vibration system
- Vertical shafts
- Gears
- Bearings
Hydraulic System
- Hydraulic pressure system
- Hydraulic pump
- Hydraulic temperature meter
- Hydraulic control assembly
- Hydraulic pressure pipes
- Hydraulic fittings
Mixing & Conveying
- Aggregate mixer
- Mixer motor
- Mixer gearbox
- Conveyor
- Conveyor belt
- Conveyor gearbox
Electrical
- Electrical control panel
- Electric motors
- Limit/electric sensor
- Control components
The quotation specifically identifies imported components such as hydraulic systems, pumps, vibration equipment, shafts, bearings and conveyor belts alongside Silver Steel Mills-manufactured components.
Materials Used for Concrete Block & Paver Production
The SSM 15 can be configured for concrete products manufactured from suitable concrete mixtures containing materials such as:
- Cement
- Sand
- Crush / stone aggregate
- Fine aggregate
- Suitable mineral additives where required
- Water
For a particular product, Silver Steel Mills can determine the appropriate mould and production configuration according to the customer’s required dimensions and product type.
Product strength is not determined by the machine alone. It depends heavily on the concrete recipe, aggregate grading, cement content, water control, compaction, vibration and curing.
SSM 15 for Paver & Tuff Tile Production
For customers specifically interested in a paver block machine in Pakistan, the SSM 15 can be configured around rectangular pavers and other compatible tile designs.
The supplied specification identifies:
15 rectangular pavers per pallet
and a product height range of:
50–200 mm.
The appropriate mould should be selected according to:
- Paver dimensions
- Thickness
- Surface design
- Interlocking profile
- Required production quantity
- Required pallet arrangement
SSM 15 for Block Production
The machine can also be configured for compatible concrete block production.
For block production, the required mould determines:
- Block dimensions
- Number of blocks per cycle
- Number of blocks per pallet
- Production output
- Product weight
- Material consumption
This is why Silver Steel Mills should quote the machine together with the exact mould specification required by the customer, rather than giving one generic production figure for every block size.
Why Choose SSM 15?
Automatic Production System
Automatic pallet and single-trolley operation helps streamline production.
100–110 Pallets/Hour Rated Production
The supplied specification gives a production capacity of 100–110 pallets per hour.
25–35 Second Moulding Cycle
Designed for continuous commercial production.
20 HP Vibration System
Two 10 HP vibration motors provide a combined 20 HP vibration system.
20 HP Hydraulic Pump Motor
The hydraulic system is powered by a 20 HP pump motor.
Integrated Mixer & Conveyor
The machine setup includes aggregate mixing and conveyor feeding equipment.
Multiple Product Applications
One machine platform can be configured with compatible moulds for pavers, tuff tiles, blocks and other concrete products.
Manufactured & Supplied by Silver Steel Mills
The SSM 15 is supplied by Silver Steel Mills with its associated production equipment and technical installation support.
SSM 15 Installation & Commissioning
According to the supplied quotation, Silver Steel Mills provides a trained operator/technician for installation of the machine and its components.
The buyer is responsible for site-related requirements such as:
- Cement
- Crush
- Sand
- Hydraulic oil
- Electricity supply
- Electrical cables
- Required fitting materials
Before installation, the customer should prepare the required foundation, electrical supply, raw-material storage and operating area according to the final plant layout.
SSM 15 Spare Parts & Maintenance
The SSM 15 uses a combination of locally manufactured Silver Steel Mills components and imported components.
The supplied documentation identifies imported components including hydraulic equipment, pumps, hydraulic fittings, bearings, vibration equipment and conveyor belt components.
For long-term machine performance, regular maintenance should include:
- Hydraulic oil inspection
- Hydraulic leakage inspection
- Bearing lubrication
- Gearbox oil inspection
- Vibration system inspection
- Conveyor belt alignment
- Electrical panel inspection
- Mould inspection
- Hydraulic pipe/fitting inspection
- Regular cleaning of concrete buildup
SSM 15 Block Machine Price in Pakistan
The supplied SSM 15 quotation lists a factory price of:
PKR 4,100,000
for the SSM 15 configuration shown in the quotation.
Note: Machine prices can change according to the final configuration, moulds, accessories, taxes, transportation and other customer requirements. Therefore, customers should request a current quotation before making a purchase decision.
SSM 15 Block Machine in Pakistan – Who Is It For?
The SSM 15 is suitable for:
- Block manufacturing businesses
- Paver manufacturing businesses
- Tuff tile manufacturers
- Construction-material suppliers
- Housing projects
- Contractors
- Small and medium production units
- Local building-material factories
- Entrepreneurs starting a concrete-product business
It is particularly suitable where the customer wants an automatic single-trolley production system without moving immediately to a larger double-trolley industrial plant.
SSM 15 vs Larger Silver Steel Mills Plants
Silver Steel Mills offers different production configurations for different production requirements.
If your requirement is relatively compact automatic production, the SSM 15 can be considered.
For higher-volume requirements, customers can evaluate larger models such as:
- SSM 18
- SSM 24
- SSM 28
- SSM 35
- SSM D50
The correct model should be selected according to the required product, daily output, mould configuration, available electrical power, site area and budget.
Get SSM 15 Block Machine Quotation
Looking for an SSM 15 block machine in Pakistan?
Send Silver Steel Mills the following information:
- Product required — block, paver, brick or tuff tile
- Product dimensions
- Product thickness
- Required daily production
- Automatic or semi-automatic requirement
- Available site area
- Required mould type
- Batching plant requirement
- Conveyor/mixer requirement
- Delivery location
Our technical team can prepare the machine configuration and quotation according to your production requirements.
Silver Steel Mills
Block Machine Manufacturer in Pakistan
Factory / Head Office: Lahore, Pakistan
Phone: +92 324 9500004
Email: info@silversteelmills.com
Frequently Asked Questions
What is the SSM 15 block machine?
The SSM 15 is an automatic single-trolley concrete block, paver and tuff tile making machine manufactured and supplied by Silver Steel Mills.
What is the SSM 15 production capacity?
The supplied technical specification lists 100–110 pallets per hour. Actual piece production depends on the mould and product configuration.
What is the SSM 15 molding cycle?
The specified molding cycle is 25–35 seconds.
How much electrical power does SSM 15 require?
The supplied specification lists approximately 63 HP total connected motor capacity, consisting of 20 HP vibration, 20 HP hydraulic pump, 20 HP mixer and 3 HP conveyor gear motor.
What products can SSM 15 make?
With the appropriate mould, the machine can be configured for concrete pavers, tuff tiles, blocks, bricks and other compatible molded concrete products.
What is the pallet size?
The supplied SSM 15 specification lists a 650 × 750 × 28 mm wooden pallet.
What product thickness can SSM 15 produce?
The supplied specification lists a product height range of 50–200 mm.
Is SSM 15 manufactured in Pakistan?
Yes. Silver Steel Mills supplies the SSM 15 as part of its concrete block, paver and tuff tile machinery manufacturing portfolio in Pakistan.
