Description
Glass Wool Price in Pakistan: Quality Insulation Solutions by Silver Steel Mills
✅ Introduction: Why Glass Wool Insulation Matters in Pakistan
With rising energy costs and extreme weather conditions across Pakistan, insulating industrial, commercial, and even residential buildings has become a necessity. Among the most effective and affordable solutions is glass wool insulation. Silver Steel Mills, a trusted industrial manufacturer, offers high-grade glass wool insulation at a competitive price of PKR 55 per square foot, delivering energy efficiency, noise reduction, and structural comfort.
If you’re searching for updated and semantically optimized information on:
- Glass wool price in Pakistan
- Glass wool insulation price
- Best glass wool rolls for thermal and soundproofing insulation
This article provides the complete breakdown you need — pricing, application, benefits, and why Silver Steel Mills is your go-to choice.
Glasswool Insulation in Pakistan: The Professional Guide to Thermal Control
In Pakistan’s diverse climate—where scorching summers can turn industrial sheds into ovens and chilly winters demand effective heat retention—insulation is no longer a luxury; it is a fundamental requirement. Among the various materials available, Glasswool Insulation has emerged as the industry standard for dairy farms, warehouses, marriage halls, and large-scale storage facilities.
At Silver Steel Mills (SSM), we prioritize the use of high-performance glasswool to ensure the structures we build remain energy-efficient, safe, and comfortable. This article explores why glasswool is the preferred choice for Pakistani infrastructure and how it functions as a thermal shield.
What is Glasswool Insulation?
Glasswool is an insulating material made from recycled glass fibers bonded together with a heat-resistant resin. It is spun into a wool-like texture that creates millions of tiny air pockets. These air pockets are the “secret” to its performance; they trap air and prevent the transfer of heat, making glasswool a poor conductor of thermal energy.
In Pakistan, it is most commonly applied in 2-inch thickness for roofing applications, providing an optimal balance between cost and thermal resistance.
Why Use Glasswool in Industrial & Commercial Sheds?
1. Temperature Regulation (The “Chimney Effect”)
In a metal-roofed dairy shed or warehouse, the sun’s radiant heat passes through the steel sheets, rapidly raising the interior temperature. A 2-inch layer of glasswool acts as a thermal break. It prevents the heat from radiating into the interior, keeping the shed significantly cooler. Conversely, during winter, it traps the warmth generated inside, reducing the need for artificial heating.
2. Acoustic Performance
Large sheds like Marriage Halls or Storage Warehouses often suffer from echo and noise pollution (especially during rain). Glasswool is naturally porous, meaning it absorbs sound waves instead of reflecting them. This makes it an ideal solution for event spaces where acoustics are critical for a professional experience.
3. Fire Safety & Non-Combustibility
Glasswool is classified as a non-combustible material. In high-risk environments like industrial factories or electrical rooms, it serves as a critical safety barrier that resists flame spread, providing valuable time during emergency situations.
Applications Across Different Sectors
Dairy Sheds: Essential for heat-sensitive livestock. Maintaining a consistent, lower temperature directly correlates to improved milk production and animal health.
Marriage/Banquet Halls: Beyond thermal comfort, it provides the acoustic dampening required for high-quality audio and event experiences.
Warehouses & Storage Halls: Protects inventory from heat-induced damage (e.g., food, electronics, or chemical storage) while saving massive costs on ventilation and cooling systems.
Technical Specifications & Pricing in Pakistan
When planning your project, it is essential to understand the material specifications. Glasswool is typically supplied in blanket rolls.
Standard Roll Specifications:
Thickness: 2 inches (50mm) is the industry standard for sheds in Pakistan to achieve the required thermal R-value.
Roll Dimensions: Standard rolls are typically 15 meters in length with a width of approximately 39 inches (approx. 1 meter).
Market Price: Currently, the market price for these rolls fluctuates depending on density, the type of facing (e.g., Foil-Faced or Plain), and market availability. As of early 2026, prices generally hover around the market average for standard 15-meter rolls, but always request a current quotation as steel and glasswool fiber prices are subject to global supply chain trends.
Note: For large-scale projects, we recommend opting for Foil-Faced Glasswool. The aluminum foil facing acts as a vapor barrier, which prevents moisture from entering the glasswool fibers, ensuring the insulation lasts for decades without sagging or losing its density.
The SSM Engineering Approach
At Silver Steel Mills, we don’t just supply insulation; we integrate it into the structural design. We ensure that:
Proper Installation: We secure the glasswool rolls tight against the roof underside to prevent air gaps that could reduce the insulation’s effectiveness.
System Integration: Our fabrication team pre-plans the purlin and rafter spacing to ensure the glasswool can be installed cleanly and permanently.
Longevity: We use high-quality support meshes to keep the wool from sagging over time, ensuring your shed maintains its thermal performance year after year.
Final Thoughts: An Investment in Efficiency
While the upfront cost of glasswool insulation is an additional line item in your construction budget, the Return on Investment (ROI) is undeniable. By slashing your cooling costs and improving the comfort of your livestock or employees, a well-insulated shed typically pays for itself within 2 to 3 years of operation.
Are you ready to optimize your structure? Whether you are building a new storage hall or looking to retrofit an existing warehouse, contact our engineering desk for a custom estimate on glasswool supply and professional installation.
Glass Wool Insulation Kya Hai? (Pehle Ye Samajh Lein)
Glass wool insulation aik aisi heat-resistant material hai jo recycled glass, quartz sand, aur soda ash ko melt karke fibers mein convert kar ke banai jaati hai. Yeh fibers hapha (air) ko trap karte hain, jo heat transfer ko rokta hai. Is material ka istemal buildings, roofs, walls, aur HVAC systems mein temperature control ke liye kiya jata hai.
Pakistan mein glass wool insulation ab ek aam baat ho gayi hai. Log is ka istemal dairy sheds, marriage halls, warehouses, aur steel buildings mein kar rahe hain.
Pakistan ki garmi mein agar aapne kisi steel building mein andar ka mausam check kiya hai, to aap jaante hain ke jab suraj seedha metal roof par nikalta hai, to andar ka mahool oven jaisa ho jata hai. Glass wool isi problem ka sasta aur effective solution hai.
Glass Wool Insulation Kyon Zaroori Hai? (Problems Ye Solve Karta Hai)
Pakistan mein garmi bohat zyada hai – 45°C-50°C tak temperature pohanch jata hai. Agar aapki building ki roof simple GI sheet ya PPGI sheet ki hai to garmi andar aa jaati hai. Steel shed, dairy shed, warehouse, marriage hall – sab mein yahi problem hoti hai.
Kya Problems Hoti Hain Bina Insulation Ke?
| Problem | Explanation |
|---|---|
| Andar garam hona | Simple sheet mein garmi andar aa jaati hai. AC honay ke bawajood andar temperature control nahi rehta. |
| High electricity bill | AC continuously chalana parta hai. AC motor zyada mehnat karta hai. Bijli ka bill bohat zyada aa jata hai. |
| Animals ke liye mushkil | Dairy shed mein animals ko garmi se bachana bohat zaroori hai. Garmi mein cow ka milk production gir jata hai. Animals bimaar ho sakte hain. |
| Guests uncomfortable | Marriage hall mein agar AC hai lekin roof insulation nahi hai to AC ka asar nahi hota. Guests ko garmi lagti hai. Hall book nahi hota. |
| Products damage | Warehouse mein agar garmi zyada hai to kuch products (food, medicine, electronics) kharab ho sakte hain. |
Glass Wool In Sab Problems Ka Solution Hai:
| Benefit | Explanation |
|---|---|
| Andar temperature control | Glass wool roof par lagao to garmi roof ke neeche phans jaati hai. Andar ka temperature 10-15°C kam rehta hai. |
| Electricity saving | AC kam chalega. 30-40% bijli bachti hai. |
| Animals healthy | Dairy shed mein temperature kam rehta hai. Animals comfortable rehte hain. Milk production stable rehta hai. |
| Guests comfortable | Marriage hall mein AC ka effect hota hai. Guests happy. Hall booked rehta hai. |
| Products safe | Warehouse mein temperature control rehta hai. Products kharab nahi hote. |
Building Types Mein Glass Wool Ka Istemal (Real Applications)
1. Dairy Shed Mein Glass Wool Insulation
Dairy shed mein animals ko dhoop aur garmi se bachana bohat zaroori hai. Garmi ka direct asar animals ke milk production par parta hai.
Problem: Garmi mein cow 20-30% kam milk deti hai. Animals bimaar ho sakte hain.
Solution: 2 inch glass wool roof par lagao. Andar temperature 10-12°C kam ho jata hai.
Benefit: Milk production stable, animals healthy, electricity bill kam.
Dairy shed mein glass wool laga ke aap kya achieve karoge:
Andar temperature 35°C ke bajaye 25-28°C rehga
AC ki zaroorat kam paregi
Animals comfortable – milk production barhega
2. Marriage Hall (Wedding Hall) Mein Glass Wool Insulation
Marriage hall mein guests ki comfort bohat important hai. Agar hall andar garam hai to koi guest nahi aayega.
Problem: Steel roof hai, AC hone ke bawajood andar garmi hai.
Solution: 2 inch glass wool roof insulation. Andar temperature control rehta hai.
Benefit: AC ka effect hota hai. Guests comfortable rehte hain. Hall booked rehta hai.
Marriage hall mein glass wool lagao to:
AC continuously nahi chalega – 30-40% bijli bachat
Guests comfortable – next events bhi book honge
Building ki life barhegi
3. Warehouse / Storage Hall Mein Glass Wool Insulation
Warehouse mein goods ko protect karna hota hai. Kuch products garmi mein kharab ho jate hain.
Problem: Garmi se food items, medicines, electronics damage ho sakte hain.
Solution: Glass wool roof insulation. Andar temperature stable rehta hai.
Benefit: Products safe. Customer happy.
4. Poultry Shed Mein Glass Wool Insulation
Poultry shed mein chickens ko temperature control chahiye. Garmi mein chickens mar sakti hain.
Problem: Garmi mein chicken mortality rate barh jata hai.
Solution: Glass wool roof insulation. Andar temperature kam rehta hai.
Benefit: Chicken mortality kam. Production barh jati hai.
5. Steel Building / PEB Building Mein Glass Wool Insulation
Steel buildings (PEB) mein simple sheet use hoti hai jo garmi andar aane deti hai.
Problem: Steel building andar oven jaisa ho jata hai.
Solution: Glass wool roof insulation. Andar temperature control.
Benefit: Building comfortable. Electricity bill kam.
2 Inch (50mm) Glass Wool Insulation – Kyun Best Hai Roof Ke Liye?
2 Inch Thickness Ki Specifications
| Parameter | Value |
|---|---|
| Thickness | 50mm (2 inch) |
| Width (Roll) | 39 inch (approx 1 meter) |
| Length (Roll) | 15 meter |
| Density Range | 12-24 kg/m³ (standard for roofs) |
| Thermal Conductivity | 0.032-0.040 W/m·K |
| R-Value | ~1.6-2.2 m²·K/W (for 50mm) |
| Fire Rating | Non-combustible (A1/A2 class) |
2 Inch Thickness Se Kitni Temperature Reduction Hoti Hai?
Without insulation: simple sheet roof, andar temperature 45-50°C
With 2 inch glass wool: andar temperature 28-35°C (10-15°C kam)
Yani 2 inch thickness ka glass wool roof par laga ke aap 10-15°C cooler temperature achieve kar sakte ho.
Kyun 2 Inch Best Hai Roof Ke Liye?
| Reason | Explanation |
|---|---|
| Sufficient thickness | 2 inch enough hai roof insulation ke liye. 1 inch kam effective hai, 3 inch extra cost hai. |
| Lightweight | 2 inch roll ka weight manage karna easy hai |
| Cost effective | Best balance of price and performance |
| Easy installation | Standard thickness – installers familiar hain |
Glass Wool Roll – 15 Meter Length, 39 Inch Width – Complete Details
Product Specifications
| Parameter | Detail |
|---|---|
| Product Name | Glass Wool Insulation Roll |
| Length | 15 meter (approx 49 feet) |
| Width | 39 inch (approx 1 meter) |
| Thickness Options | 25mm, 50mm (2 inch), 75mm, 100mm |
| Density Options | 12 kg/m³, 16 kg/m³, 20 kg/m³, 24 kg/m³ |
| Material | Centrifugal spun glass fibers |
| Thermal Conductivity (λ-value) | 0.032-0.040 W/m·K |
| Fire Resistance | Non-combustible (Class A1/A2) |
| Sound Absorption | NRC up to 0.95 |
| Facing | Aluminum foil (optional) |
Brand Options Available in Pakistan:
| Brand | Features |
|---|---|
| KIMMCO | Premium quality, imported, high density |
| ISOVER (Saint-Gobain) | International brand, high R-value |
| IZOCAM | Good quality, competitive price |
| SOKING | Chinese, economical |
Silver Steel Mills in sab brands ki glass wool supply karta hai.
Glass Wool Price in Pakistan – 15 Meter × 39 Inch × 2 Inch Roll
Approximate Price Ranges (2025)
| Brand | Density (kg/m³) | Approx Price per Roll (PKR) | Price per sqft (approx) |
|---|---|---|---|
| Local / Chinese (SOKING等) | 12-16 | 4,000 – 5,500 | 50-70 |
| Local / Chinese (SOKING等) | 16-20 | 5,500 – 7,000 | 70-90 |
| KIMMCO / IZOCAM | 16-20 | 7,000 – 9,000 | 90-115 |
| Premium (ISOVER, Saint-Gobain) | 20-24 | 9,000 – 12,000 | 115-155 |
Coverage Area:
Ek 15 meter × 39 inch (1 meter) ka roll cover karega:
| Width (m) | Length (m) | Area (m²) | Area (sqft) |
|---|---|---|---|
| 1.0 | 15 | 15 | ~160 sqft |
Yani aik roll approximately 160 sqft roof cover karega.
Price per Square Foot Calculation:
Chinese brand: 160 sqft cover ÷ 5,000 PKR = ~Rs 31 per sqft
KIMMCO: 160 sqft cover ÷ 8,000 PKR = ~Rs 50 per sqft
Premium: 160 sqft cover ÷ 11,000 PKR = ~Rs 69 per sqft
Complete Shed Insulation Cost Example:
For a 2,000 sqft roof:
Rolls needed: 2,000 ÷ 160 = ~13 rolls
Chinese brand (5,000/roll): 13 × 5,000 = Rs 65,000
KIMMCO (8,000/roll): 13 × 8,000 = Rs 1,04,000
Installation charges extra (approx Rs 30-50 per sqft).
Glass Wool Insulation Installation Kaise Karte Hain? (Process)
Installation Steps:
Roof Preparation: Clean roof surface. Remove any sharp objects.
Purlin Check: Ensure purlins are properly installed and spaced.
Unroll Glass Wool: Carefully unroll glass wool on the purlins. (Be careful – glass wool can irritate skin. Use gloves, mask, goggles.)
Cut to Size: Cut glass wool to fit between purlins using a long-bladed knife.
Secure in Place: Use GI wire, insulation pins, or adhesive to secure.
Overlap Joints: Overlap each sheet by a few inches to prevent heat leakage.
Apply Foil Facing: If using foil-faced glass wool, the foil should face the interior (for heat reflection).
Install Roof Sheets: Install roof sheets over the insulation (for new construction). If retrofitting: install sheets first, then insulation from inside (with hanging wires).
Important Tips:
Wear gloves, mask, goggles – glass wool fibers can irritate skin, eyes, and lungs.
Don’t compress glass wool excessively – it reduces insulation effectiveness.
Seal all joints and edges properly.
Silver Steel Mills complete installation service bhi provide karta hai.
Glass Wool Insulation Without Aluminum Foil vs With Foil
| Type | Features | Best For |
|---|---|---|
| Without foil | Lower cost, absorbs moisture | Dry areas, interior walls |
| With aluminum foil | Reflects heat, moisture barrier | Roofs, humid areas, dairy sheds |
For roof insulation in Pakistan: Foil-faced glass wool recommended. Foil reflects heat, acts as a moisture barrier, and improves overall effectiveness.
Glass Wool vs Other Insulation Materials – Comparison
| Material | Price (per sqft) | Insulation | Fire Resistance | Moisture Resistance | Life |
|---|---|---|---|---|---|
| Glass Wool (2 inch, Chinese) | 50-70 | Good | Excellent (non-combustible) | Low (absorbs water) | 10-15 years |
| Glass Wool (2 inch, Premium) | 90-150 | Very Good | Excellent (non-combustible) | Medium | 15-20 years |
| EPS Sandwich Panel (2 inch) | 350-450 | Good | Poor (flammable) | Good | 15-20 years |
| PU Sandwich Panel (2 inch) | 700-850 | Excellent | Good (FR grade available) | Excellent | 20-25 years |
| Rockwool | 200-300 | Very Good | Excellent | Good | 20-25 years |
Glass wool ka sab se bara faida: Low cost aur Excellent fire resistance.
Real Case Study – Dairy Shed Mein Glass Wool Insulation
Client: Rana Muhammad Ashraf, Sahiwal
Year: 2024
Building: 2,500 sqft dairy shed (50 cows)
Problem Before Insulation:
Garmi mein animals uncomfortable
Milk production 7-8 liters per cow daily
Fans continuously chaltay thay
Electricity bill 18,000-20,000
Solution:
50mm (2 inch) glass wool (16 kg/m³ density, with aluminum foil)
Installed on the roof
Installation time: 2 days
Result After Insulation:
| Parameter | Before | After |
|---|---|---|
| Inside temperature (when outside 45°C) | 42°C | 32°C (10°C kam) |
| Milk production per cow | 7-8 liters | 9-10 liters |
| Fans running | 24/7 | 12 hours/day |
| Electricity bill | 20,000/month | 12,000/month (40% saving) |
| Animal health | Bimari common | Healthy |
Cost Breakdown:
Glass wool rolls (local 16 kg/m³): 16 rolls × 5,500 = Rs 88,000
Installation labor + wire clips: Rs 25,000
Total investment: Rs 1,13,000
Return on Investment (ROI):
Monthly electricity saving: Rs 8,000
Extra milk value: Rs 20,000-30,000/month
Total monthly saving: Rs 28,000-38,000
ROI: 3-4 months
FAQ – Aksar Poochay Jane Wale Sawal
Q1: 2 inch glass wool roof insulation ka price kya hai?
Price brand aur density par depend karta hai. Chinese (SOKING etc) 12-16 kg/m³: PKR 4,000-5,500 per roll (15m × 1m). Premium brands (KIMMCO, ISOVER) 16-20 kg/m³: PKR 7,000-12,000 per roll.
Q2: Glass wool insulation andar kitni temperature reduction deta hai?
10-15°C cooler than outside. Agar bahar 45°C hai to andar 30-35°C rehta hai.
Q3: Glass wool moisture absorb karta hai?
Yes, glass wool absorbs water. For roof insulation, use foil-faced glass wool – foil acts as a moisture barrier.
Q4: Glass wool fire resistant hai kya?
Yes, glass wool is non-combustible. It is Class A/A1 fire-rated (highest fire safety rating).
Q5: Glass wool soundproofing bhi karta hai?
Yes, glass wool absorbs sound (NRC up to 0.95). Dairy shed mein animals ka shor kam hota hai. Marriage hall mein sound clarity better hoti hai.
Q6: Glass wool harmful hai kya?
Installation ke time protective gear pehno (gloves, mask, goggles). Installation ke baad ye sealed ho jata hai, koi harm nahi hai.
Q7: Glass wool ki life kitni hai?
Proper installation ke saath 10-20 years. Foil-faced version zyada chalta hai.
Q8: Kya aap glass wool installation bhi karte ho?
Yes, Silver Steel Mills supply + installation both karta hai.
Q9: Kaunsi density choose karni chahiye roof ke liye?
16-20 kg/m³ best hai. Zyada density se insulation better hota hai lekin price zyada hoti hai. 24 kg/m³ overkill hai roof ke liye.
Q10: Glass wool price per sqft kya hai?
Rs 30-70 per sqft (material only). Installation extra.
Why Choose Silver Steel Mills for Glass Wool Insulation?
| # | Reason |
|---|---|
| 1 | Authorized supplier of KIMMCO, ISOVER, SOKING brands |
| 2 | Stock available – 2 inch (50mm) thickness, 39 inch width, 15 meter length rolls |
| 3 | Bulk order discounts – Low prices for large projects |
| 4 | Complete solution – Glass wool + wire + clips + installation |
| 5 | Nationwide delivery – Pakistan ke har city mein delivery |
| 6 | Expert guidance – Right density, thickness, and quantity ka selection |
| 7 | Competitive pricing – Direct supply se middleman ka commission nahi |
Conclusion – Apne Shed Ke Liye Sahi Glass Wool Kaise Chunein?
Quick Selection Guide:
| Building Type | Recommended Glass Wool | Thickness | Density |
|---|---|---|---|
| Dairy shed | Foil-faced, local/Premium | 2 inch (50mm) | 16-20 kg/m³ |
| Poultry shed | Foil-faced, local | 2 inch (50mm) | 16 kg/m³ |
| Marriage hall | Foil-faced, Premium | 2 inch (50mm) | 20 kg/m³ |
| Warehouse | Foil-faced, local | 2 inch (50mm) | 16 kg/m³ |
| Steel/PEB building | Foil-faced, Premium | 2 inch (50mm) | 20 kg/m³ |
2 Inch Glass Wool (50mm) – Kyun Best Hai?
Sufficient thickness for Pakistan’s extreme heat
Cost-effective (best value for money)
Fire-safe (non-combustible A1/A2 rated)
Lightweight (easy to handle)
Silver Steel Mills – Complete Roof Insulation Solution:
Glass wool supply (all brands)
Professional installation services
Nationwide delivery
Bulk order discounts available
📌 What Is Glass Wool?
Glass wool is a fibrous thermal insulation material made by spinning molten glass into fine fibers. It is known for:
- Low thermal conductivity
- Sound absorption capability
- Fire resistance
- Lightweight and flexible installation
It comes in rolls or slabs, often wrapped in aluminum foil or Kraft paper for enhanced durability.
💰 Updated Glass Wool Price in Pakistan — May 2025
At Silver Steel Mills, the current glass wool insulation price in Pakistan is:
➡️ PKR 55 per square foot ➡️ Thickness available: 25mm, 50mm, 75mm ➡️ Roll length: 10m to 20m depending on thickness ➡️ Density: 12kg/m3 to 24kg/m3
This price is based on bulk industrial-grade orders and includes full quality assurance and delivery within major cities.
📦 Custom quotes available for project-specific orders and large quantity procurement.
🧱 Applications of Glass Wool Insulation in Pakistan
Silver Steel Mills supplies and installs glass wool insulation across multiple sectors:
🏭 Industrial Sheds & Factories
- Wall and roof insulation
- Reduces heat load by up to 60%
- Maintains equipment temperature
🏢 Commercial Buildings & Offices
- HVAC duct insulation
- Ceiling and partition soundproofing
- Reduces air conditioning cost by 30–50%
🏠 Residential Projects
- Attic insulation
- Noise control in walls and floors
- Ideal for high-temperature cities like Lahore, Multan, and Karachi
🔍 Why Choose Silver Steel Mills for Glass Wool?
Silver Steel Mills isn’t just a steel manufacturer — we’re a full-service construction and insulation solutions provider with a strong portfolio in:
- Steel warehouses & pre-engineered buildings (PEBs)
- Insulated roofing sheets and sandwich panels
- Custom insulation supply and fitting
✅ Key Benefits:
- Consistent stock availability
- Best-in-market price (PKR 55/sqft)
- Technical installation support
- High-density rolls for enhanced performance
- Fast delivery across Pakistan
Our glass wool products meet international thermal standards and are perfectly suited for Pakistani weather and building norms.
🔧 How to Order Glass Wool from Silver Steel Mills
Ordering is simple. We provide full consultation and supply support:
- Contact via www.silversteelmills.com
- Get a custom quote based on your area and insulation requirement
- Finalize specs, thickness, and delivery schedule
- Installation available on request with expert technicians
💡 Need bulk rolls for your warehouse or factory? We offer discounted packages for 10,000+ sqft orders.
🏁 Final Thoughts: Insulate Smart with Silver Steel Mills
If you’re looking for reliable, fire-safe, and thermally efficient insulation, glass wool remains the best option. And when it comes to the best glass wool price in Pakistan, no one beats Silver Steel Mills at PKR 55/sqft with premium quality and dedicated service.
✅ Save energy ✅ Lower AC bills ✅ Create quieter, cooler, and more productive spaces
Get in touch today at silversteelmills.com and upgrade your building with Pakistan’s top-rated insulation products.
Targeted Keywords: glass wool price in Pakistan, glass wool insulation price, thermal insulation material, industrial shed insulation, noise control insulation, glass wool rolls, Pakistan insulation manufacturers, Silver Steel Mills glass wool.
Why Glass Wool Insulation is the Preferred Choice in Pakistan
Glass wool insulation is becoming the go-to solution for thermal and acoustic insulation in both residential and industrial buildings across Pakistan. Its unique structure of interwoven fibers traps air, reducing heat transfer and energy loss. As Pakistan faces rising electricity costs and extreme temperature fluctuations, the demand for effective insulation materials has never been higher.
Silver Steel Mills has emerged as one of the most trusted names in the insulation market, providing premium-quality glass wool insulation at an affordable rate of just 55 PKR per square foot. Unlike traditional methods, glass wool offers excellent performance, long life, and is completely fire-resistant — making it an ideal choice for:
Industrial sheds and warehouses
Pre-engineered buildings (PEBs)
Cold storages and poultry farms
Residential homes and commercial plazas
Whether you are constructing a new facility or upgrading an existing one, Silver Steel Mills ensures that your insulation needs are met with quality and precision.
Installation Benefits of Glass Wool Insulation in Pakistan
When it comes to insulating a building, both material quality and proper installation are critical. Glass wool insulation not only offers high thermal resistance but also provides soundproofing and fire protection. Its lightweight nature makes installation easier and faster compared to other insulation materials like rock wool or polyurethane foam.
At Silver Steel Mills, our expert team ensures that installation is done seamlessly, preserving the structural integrity of your shed, warehouse, or commercial unit. We follow a hassle-free process:
Site assessment by our technical team
Accurate measurement and estimation
High-quality rolls and sheets of glass wool, cut to fit
Clean and efficient insulation done within hours
Plus, thanks to the current price of just 55 PKR per square foot, our solution is one of the most cost-effective in the market. Clients across Pakistan—from Karachi to Lahore, Faisalabad to Islamabad—are choosing Silver Steel for dependable insulation that lasts for decades.
glass wool price in Pakistan
glass wool insulation price
glass wool price in Pakistan per square foot
while promoting Silver Steel Mills at the current rate of PKR 55 per square foot:
Market Comparison: Why Silver Steel Mills Offers the Best Glass Wool Price in Pakistan
In today’s market, insulation materials come with widely varying prices and quality standards. While some suppliers offer glass wool at inflated rates of PKR 70 to 85 per square foot, they often compromise on thickness, density, or fire safety standards. Others import low-density rolls that deteriorate quickly in the Pakistani climate.
Silver Steel Mills stands out by offering premium-grade glass wool insulation at just PKR 55 per square foot, without compromising on:
Thickness (25mm to 100mm options available)
Density (12–24 kg/m³ for optimal thermal performance)
Fire resistance (non-combustible material)
Water repellency (ideal for humid environments)
By choosing us, you’re not only saving on cost per foot—you’re investing in long-term energy efficiency, comfort, and protection.
Applications of Glass Wool Insulation in Pakistan’s Construction Industry
Glass wool is not just an insulation material—it’s a versatile solution for multiple sectors across Pakistan. From scorching summers to chilly winters, it ensures thermal regulation and energy savings in various environments.
1. Industrial Sheds and Warehouses
Silver Steel Mills specializes in industrial steel sheds, where glass wool insulation is critical. It reduces heat penetration, protects goods in storage, and ensures a cooler working environment for employees.
2. Pre-Engineered Buildings (PEBs)
Glass wool sheets are commonly installed in walls and roofs of PEB structures. Silver Steel Mills integrates insulation during the design phase to improve efficiency and reduce post-construction modifications.
3. Cold Storages and Refrigerated Rooms
Glass wool’s low thermal conductivity makes it ideal for maintaining internal temperatures, particularly in pharmaceutical, dairy, and agricultural storage facilities.
4. Residential Homes and Offices
In urban areas like Lahore, Karachi, and Islamabad, glass wool is increasingly used in ceilings and walls for soundproofing and temperature control—an ideal solution for AC load reduction.
Silver Steel Mills customizes insulation thickness and layering based on your project needs while maintaining the affordable rate of PKR 55 per square foot.
